Generally, the workshop floor adopts concrete, terrazzo, epoxy resin, paint and other floors. In addition, the environment of factory workshops is worse than that of commercial places, and traditional manual cleaning is difficult to achieve the desired cleaning effect. Before and after cleaning, the floor washer can be directly sucked dry, which will not affect the movement of personnel, and can thoroughly clean the sewage and dirt. The traditional cleaning method can no longer adapt to the development of the times. The appearance of the floor washer has improved the shortcomings of the traditional method and greatly improved the cleaning efficiency. The cleaner has been liberated from the heavy physical labor. The factory workshop generally adopts the following floors.
1. Ordinary cement floor cleaning
The ordinary cement floor is rough, so it will produce a lot of friction when using the floor washer. It is generally not recommended to use a cleaning pad to clean it. You can directly use a brush disc to clean it. Because the cement floor has a certain degree of water absorption, the water output should be as large as possible when cleaning, so the cleaning effect will be much better.
2. Terrazzo floor cleaning
The terrazzo floor shall be cleaned with a floor washer, and it is necessary to choose whether to use a brush disc or a cleaning pad according to the cleanliness of the floor. If the terrazzo floor is newly made, it can be cleaned with a washer equipped with a cleaning pad. If the terrazzo floor is not newly made, it can be cleaned with a brush disc. If there is oil stain on the ground, it can be cleaned better with degreaser.
3. Epoxy floor paint floor cleaning
The epoxy floor paint and other floors are generally used in the environment with high environmental requirements. The floor washing machine is generally equipped with cleaning pads to clean such floors. Black, red and white pads can be selected according to the degree of dirt on the floor. Black pads have the largest friction, while red pads are mostly used. If the sewage and dirt on the ground are not serious, brush disc can be used for effective cleaning.
Selecting a floor washer for cleaning operation can not only save labor costs, but also improve cleaning efficiency and cleaning effect. With the development of the times and the progress of science and technology, the workload of human beings is becoming smaller and smaller, and cleaning operations are becoming simpler and more economical. The floor of the factory workshop is cleaned with a floor washer, which saves time, labor and worry.